Chapter 18: Case - Brunswick Motors (page 621). Excel templates as necessary.;Recently, Phil Harris, the production control manager at Brunswick, read an article on the time-phased;requirements planning. He was curious about how this technique might work in scheduling Brunswick?s engine assembly operations and decided to prepare an example to illustrate the use of time-phase requirements planning. Phil?s first step was to prepare a master schedule for one of the engine types produced by Brunswick: Model 100 engine. This schedule indicates the number of units of the Model 1000 engine to be assembled each week during the last 12 weeks and is shown below. Next, Phil decided to simplify his requirements planning example by considering only two of the many components that are needed to complete the assembly of the Model 1000 engine. These two components, the gear box and the input shaft, are shown in the product structure diagram shown on the next page. Phil noted that sequent is sent to the main engine assembly line. The input shaft is one of several component parts manufactured by Brunswick that are needed to produce a gear box subassembly. Thus, levels 0, 1, and 2 are included in the product structure diagram to indicate the three manufacturing stage that is involved in producing an engine: The Engine Assembly Department, the Subassembly Department, and the Machine Shop.;The manufacturing lead times required to produce the gear box and input shaft components are also indicated in the product structure diagram. Note that two weeks are required to produce a batch of gear boxes and that all the gear boxes must be delivered to the assembly line parts stockroom before Monday morning of the week in which they are to be used. Likewise, it takes three weeks to produce;a lot of input shafts, and all the shafts that are needed for the production of gear boxes in a given week must be delivered to the Subassembly Department stockroom before Monday morning of that week.;In preparing the MRO example Phil planned to use the worksheets shown on the next page and make the following assumptions;1. Seventeen gear boxes are on hand at he beginning of week 1, and five gear boxes are currently on order to be delivered at the start of week 2.;2. Forty input shafts are on hand at the start of week 1, and 22 are scheduled for delivery at the;beginning of week 2.;Assignment;1. Initially, assume that Phil wants to minimize his inventory requirements. Assume that each order will be only for what is required for a single period. Using the following forms, calculate the net requirements and planned order release for the gear boxes and input shafts. Assume that;lot sizing is done using lot-for-lot.;2. Phil would like to consider the costs that his accountants are currently using for inventory carrying and setup for the gear boxes and input shafts. These costs are as;follows;Gear box;Input Shaft;Setup = $90/order;Inventory carrying cost = $2/unit/week;Setup = $45/order;Inventory carrying cost = $1/unit/week;Given the cost structure, evaluate the cost of the schedule from (1). Assume inventory is valued at the end of each week.;3. Calculate a schedule using least-total-cost lot sizing. What are the savings with this new schedule?
Paper#31844 | Written in 18-Jul-2015Price : $34